Skip to content
Anatomy of a 3-ply conveyor belt: top cover, three nylon plies with rubber skims between, bottom cover
MB-ST-3P

3 Ply Conveyor Belt

The all-round spec for mobile crushing and screening.

Ships next day
Standard
DIN 22102
Carcass
EP fabric, 3 plies
Tensile rating
EP578/3 - PIW330/3
Belt width
16″–63″ (400–1600 mm)
Temperature range
-30°C to +70°C
Request a quote

About this belt

The workhorse of the standard range: a three-ply EP carcass that covers the main and side conveyors of most mobile crushers, screeners and recyclers. Strong enough for heavy, abrasive duty, flexible enough to trough cleanly on standard idler sets.

Manufactured to DIN 22102 with cover grades matched to your material, and supplied endless, cut-length, stripped or MRB ZIP® prepared.

DIN 22102ISO 9001

Why it wins

  • The most-specified ply count on mobile plant
  • 3-ply EP carcass — high strength, low stretch
  • Cover grades for abrasion, impact and cut resistance
  • Available endless, stripped, cut-length or MRB ZIP® prepared
  • Cross-referenced MB part numbers for fast reordering

Applications

CrushingScreeningQuarryingAggregates
Related

Also worth a look.

MB-ST-2P
Anatomy of a 2-ply conveyor belt: top cover, two nylon plies with a rubber skim between, bottom cover
MB-ST-2P

2 Ply Conveyor Belt

Standard
DIN 22102
Carcass
EP fabric, 2 plies
Ships next dayView product
MB-ST-4P
Anatomy of a 4-ply conveyor belt: top cover, four nylon plies with rubber skims between, bottom cover
MB-ST-4P

4 Ply Conveyor Belt

Standard
DIN 22102
Carcass
EP fabric, 4 plies
Ships next dayView product
MB-HD-F
Bulldog Cleat belt render: plain heavy-duty top cover with the two reinforced straight-warp plies exposed at the corner
MB-HD-F

Bulldog Cleat

Carcass
2 Straight warp
Coverage
Cut / impact / wear resistant
Made to orderView product