Skip to content
Anatomy of a 4-ply conveyor belt: top cover, four nylon plies with rubber skims between, bottom cover
MB-ST-4P

4 Ply Conveyor Belt

High-tension carcass for long centres and heavy loads.

Ships next day
Standard
DIN 22102
Carcass
EP fabric, 4 plies
Tensile rating
EP630/4 - PIW360/4
Belt width
20″–79″ (500–2000 mm)
Temperature range
-30°C to +70°C
Request a quote

About this belt

A four-ply EP carcass for the hardest-working drives in the standard range: long-centre stackers, primary crusher discharge and wide belts moving real tonnage. The extra ply carries the tension that would stretch a lighter belt out of service.

Manufactured to DIN 22102 with impact-resistant covers, and supplied endless, cut-length, stripped or MRB ZIP® prepared.

DIN 22102ISO 9001

Why it wins

  • 4-ply EP carcass for high-tension, long-centre drives
  • Absorbs the impact of large lumps under extreme conditions
  • Cover grades for abrasion, impact and cut resistance
  • Available endless, stripped, cut-length or MRB ZIP® prepared
  • Cross-referenced MB part numbers for fast reordering

Applications

CrushingQuarryingMiningAggregates
Related

Also worth a look.

MB-ST-3P
Anatomy of a 3-ply conveyor belt: top cover, three nylon plies with rubber skims between, bottom cover
MB-ST-3P

3 Ply Conveyor Belt

Standard
DIN 22102
Carcass
EP fabric, 3 plies
Ships next dayView product
MB-ST-2P
Anatomy of a 2-ply conveyor belt: top cover, two nylon plies with a rubber skim between, bottom cover
MB-ST-2P

2 Ply Conveyor Belt

Standard
DIN 22102
Carcass
EP fabric, 2 plies
Ships next dayView product
MB-HD-F
Bulldog Cleat belt render: plain heavy-duty top cover with the two reinforced straight-warp plies exposed at the corner
MB-HD-F

Bulldog Cleat

Carcass
2 Straight warp
Coverage
Cut / impact / wear resistant
Made to orderView product