Skip to content
3D render of the C15 chevron profile (C15P385 pattern shown, representative of the range)
MB-IN-C15P540

C15P540 Chevron Pattern

Tight 182 mm pitch keeps fines climbing.

Made to order
Profile
C15P540
Cleat height
15 mm
Cleat width
540 mm
Belt widths
1050 mm
Base belts
EP400/3 3+1.5
Request a quote

About this belt

A 15 mm chevron at the tightest pitch in the range — 182 mm — so fine, free-flowing material meets a cleat before it can slide back. Specified for 1050 mm belts on an EP400/3 carcass.

The go-to MRB CleatMax pattern for fines conveyors and secondary screened material.

DIN 22102ISO 9001

Why it wins

  • Tight 182 mm pitch for fine, free-flowing material
  • Integrally hot-molded into the top cover — never glued
  • 15 mm cleat height across a 540 mm cleat width
  • EP400/3 3+1.5 base belt
  • Available as full rolls, cut lengths, endless or MRB ZIP® prepared

Applications

Fines conveyingScreeningSand & gravel
Related

Also worth a look.

MB-IN-C15P385
3D render of the C15P385 chevron pattern molded on a conveyor belt
MB-IN-C15P385

C15P385 Chevron Pattern

Profile
C15P385
Cleat height
15 mm
Made to orderView product
MB-IN-C15P800
3D render of the wide C15 chevron profile (C15P750 pattern shown, representative of the range)
MB-IN-C15P800

C15P800 Chevron Pattern

Profile
C15P800
Cleat height
15 mm
Made to orderView product
MB-ST-3P
Anatomy of a 3-ply conveyor belt: top cover, three nylon plies with rubber skims between, bottom cover
MB-ST-3P

3 Ply Conveyor Belt

Standard
DIN 22102
Carcass
EP fabric, 3 plies
Ships next dayView product